Piston Pump

Advantages:

1. Wear resistance: The piston pump is made of alumina ceramic fired and finely ground, with a hardness of HLC8.5 or above and a surface roughness of 0.4um. There is no shear movement between the piston and the conveyed material, which is suitable for conveying materials containing sand and solid particles;

2. Strong self-priming ability: piston vacuum method, self-priming ability 0-6 meters (the specific gravity of the material determines the change in the suction range);

3. Adjustable constant pressure automatic variable: The working pressure of the rod plug mud pump is adjustable and can be adjusted arbitrarily within the range of 0-20 kg. The adjusted pressure will not change due to changes in the pump output flow rate, and will maintain the set pressure. Even if the outlet of the running pump is closed, the pressure will not change. (The change cannot exceed the limit flow rate of the pump, and the flow rate can be zero);

4. High pressure and fast speed: Ordinary models can withstand a pressure of 20 kg. When the pressure ≥5kg and the flow rate is the same, the motor power of the piston mud pump is 1 to 2 models smaller than other types of pumps;

5. Simple operation: To adjust the pressure, you only need to tighten or loosen the pressure regulating valve. After adjusting the pressure, lock it and no need to adjust it again;

6. Low cost of use: The vulnerable parts of the pump are the valve disc and piston seal. The replacement cycle of ceramic slurry is every 3-6 months, and the replacement cycle of municipal sludge is 6-12 months;

Long service life: The service life is at least 15 years.

7. Model: YB200, YB250, YB300